Imininingwane enzuzo
Indlela yokuthumela:Ukuthumela ngokushesha
Ukubonisa umlingani
I-High-Flow PC/ABS Engineering Plastic Yezinto Zasekhaya Nezokusebenza Kwezimboni
I-PC/ABS AC3100 iyinhlanganisela ye-thermoplastic esebenza kahle kakhulu ehlanganisa i-polycarbonate (PC) futhi i-acrylonitrile-butadiene-styrene (ABS). Ngokuhlanganisa izakhiwo ezinhle kakhulu ze-PC ne-ABS, into leyo inikeza inhlanganisela elinganiselayo ye-amandla emishini, ukumelana nomthelela, ukumelana nokushisa, ukusebenza kahle, nokuzinza kobukhulu.
Nge-izici zokugeleza okuphezulu, i-PC/ABS AC3100 ifanele izinhlelo ezidinga ukujova okusebenzayo nokukhwalithi kahle kwendawo. Impahla ihlinzekwa ngamagranule futhi itholakala ngombala oluhlaza okwesibhakabhaka.
Izici Eziyinhloko
- Ukugeleza okuphezulu ukuze kujovwe kahle
- Kuhle Kakhulu amandla okushaya
- Kuhle amandla okuqina nokuqina
- Kuhle ukumelana nokushisa
- Kuhle Ukumelana ne-UV
- Elinganiselayo ukusebenza kahle nokusebenza
- Ilungele izingxenye eziyinkimbinkimbi ezibunjiwe
- Amabuhlalu aluhlaza, angabonakali
- Ilungele izinhlelo zokusebenza zezinto zasendlini
Izinto Ezijwayelekile Ukusetshenziswa
I-PC/ABS AC3100 ingasetshenziswa ezintweni ezahlukahlukene, okuhlanganisa:
- Izinto zasendlini
- Izingxenye zangaphakathi zezimoto
- Imishini yebhizinisi
- Imishini yokuxhumana
- Imishini yokukhanyisa
- Izingxenye ezijwayelekile ezibunjiwe ngokujova
Idatha Yezobuchwepheshe
Izici Ezibonakalayo
| Impahla | Izinga Lokuhlolwa | Inani | Iyunithi |
|---|---|---|---|
| Ubuningi ku-23°C | ASTM D792 | 1.19 | g/cm³ |
| Ukuncipha ngo-23°C | I-ASTM D955 | 0.5–0.7 | % |
| I-Melt Index, 260°C / 2.16 kg | ASTM D1238 | 19 | g/10 min |
Izici Zemishini
| Impahla | Izinga Lokuhlola | Inani | Iyunithi |
| Amandla Okuqina, 50 mm/min | I-ASTM D638 | 60 | MPa |
| Ukwelula Lapho Kuphuka, 50 mm/min | ASTM D638 | 50 | % |
| Amandla Okugoba, 2.0 mm/min | ASTM D790 | 90 | MPa |
| I-Flexural Modulus, 2.0 mm/min | ASTM D790 | 2,600 | MPa |
| Izod Notched Impact, 23°C, 3.2 mm | ASTM D256 | 51.02 | kJ/m² |
| Izod Notched Impact, -10°C, 3.2 mm | ASTM D256 | 37.75 | kJ/m² |
Izici Zokushisa
| Impahla | Izinga Lokuhlolwa | Inani | Iyunithi |
| HDT, 0.45 MPa, 6.4 mm | I-ASTM D648 | 95 | °C |
| HDT, 1.8 MPa, 6.4 mm | I-ASTM D648 | 84 | °C |
Ulwazi Lomkhiqizo
| Into | Imininingwane |
| Igama Lomkhiqizo | PC/ABS AC3100 |
| Okokusetshenziswa | I-PC/ABS |
| Ifomu | Amagranule |
| Umbala | Luhlaza |
| Ukucubungula | Ukujova Okwakhiwayo |
| Isici Esiyinhloko | Ukugeleza Okuphezulu |
| Ukusetshenziswa Okujwayelekile | Izinto Zasendlini |
| Isampula | Iyatholakala |
| Isikhathi Sokulethwa | Izinsuku Zokusebenza Ezi-5–7 |
| Ukupakishwa | 25 kg/isaka |
| Ikhodi ye-HS | 39074000 |
| Imvelaphi | I-China |